The portfolio workhorse for general and ready-mix concrete. PCE-S100 is targeted at M15–M40 concrete, providing reliable water reduction with balanced slump retention (typically 60–90 minutes) and normal setting behaviour. It is the default choice for standard RMC production and the bulk of routine structural work.
PCE-S100 is targeted at M15–M40 concrete, providing reliable water reduction with balanced slump retention (typically 60–90 minutes) and normal setting behaviour. It is the default choice for standard RMC production and the bulk of routine structural work.
Built on a TPEG/HPEG polycarboxylate-ether backbone, PCE-S100 is chloride-free, low-alkali and non-corrosive, suitable for reinforced and prestressed concrete. Conforms to IS 9103:1999 · ASTM C494 Type F.
Typical dosage for this grade: 0.5–0.9% for general RMC. Confirm by trial.
Compatible with OPC 43 / 53, PPC, PSC, SRC; fly ash ≤35%, GGBS ≤50%, silica fume ≤10%.
Caution: avoid cross-contamination with naphthalene-based (SNF) admixtures in shared mixer trucks or dosing lines, which can cause flash set or severe slump loss.
IBC & bulk on request
Send us your grade, cement and site conditions. We will recommend the right PCE and arrange a trial sample.